Install the bed with the electrical wires protruding from the left side of the bed.
Obtain the remainder of the bed attachment hardware from the bag.
Install the spring, washer, and nylock nut onto each of the four bolts. Compress the spring to about 50% of its travel.
Route the cabling from the bed to the panduit on the rear bed rail and connect the two connectors.
Tuck the excess cabling inside the panduit to minimize tangling.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.