Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Reputation Breakdown
No reputation gained yet.
412
Instructions for adding idle pulley are not clear at all. Need to identify that the hole at front end of rail is install location.
My Gigabot logo plate was stuck on the narrow side of two common rails instead of on the wide side of one common rail. Pulled it off and reapplied to the wide side of one rail.
There needs to be clarity for Panduit lengths, depths and widths. We had two differnt types: Panduit CODE 00670 and CODE 00126. CODE00126 is 1" wide on solid base, 1-/16" deep, with holes and slots. CODE00670 is 5/8" wide on solid base, 5/8" deep with holes. We mounted the 0670 Panduit on base bottom Front, back and short pieces on sides. 0126 Panduit was mounted on back vertical rails. But getting the 0126 Panduit to "slip" down the rails is not possible due to an offset of about 1/4" between rail slot and T-nut location. We had to drop the T-nut down the slot first, then hold the Panduit against the rail and coax the T-nut up the rail slot with a toothpick, then capture the T-nut with the screw when it appeared in the appropriate hole. I sure hope we installed the Panduits properly, but it was a guessing game and quite confusing.