Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Reputation Breakdown
No reputation gained yet.
117
I'm currently doing a full retrofit of my OG-GB, and for the heated bed, I moved the Z-cable carrier to the middle-rear rail so that the wires could go straight down from the center of the heated bed. The green wire eyelet is problematic since it's supposed to be mounted on the back edge of the bed (on the exposed aluminum between the heated bed and whatever print surface you have installed on the aluminum). I have an OpenGB so I was able to see how the eyelet is mounted there. Attached with a small bolt. Unfortunately, our beds don't have a hole for that bolt. I tried drilling my own hole, but the head of the small bolt broke twice when trying to screw it in leaving the threaded shaft of the bolt stuck in the side of the bed. The two shafts are short enough to not cause a problem but it's frustrating. Anyway, I simply hung the eyelet on one of the bolts and used a small piece of gorilla tape to hold it in place. I don't know if this will work, but I guess we'll see.